Water Purifier   Pure Water, Labo Cube Series WE300 Water obtaining system Reverse osmosis method - Ion exchange method Obtained pure water Ion exchange water Specific resistance 10 Mohm.cm or more Water quality level A3 equivalent A highly pure water production unit that supports Labo Cube and can be installed in a draft chamber or a sink By installing this product under a draft chamber or a sink to perform washing, various test, obtaining ion exchange water for preparing regents easily. Reverse osmosis membrane (RO membrane) activated charcoal effectively removes organic materials. This enables you to obtain ion exchanged water of stable quality. Enables you to obtain water at high collection rate of 16 L/h. The unit employs a preprocess cartridge Progard3 and an ion exchange cartridge Q-GardA. Also equipped with a water leak detection function that stops water supply in case water leak occurs as a safety function. Equipped with a water obtaining unit with a handy switch (delivery kit) for obtaining water. Example of water quality analysis with WE300 (conforms to the NCCLS Type1 Water specifications) Item Specifications Specific resistance (at 25 deg.C) >=10 Mohm cm Organic material Removed with reverse osmosis (RO) and activated charcoal Microorganism =< 10 CFU/mL Fine particles Filtered with 0.22 um filter Silica (as SiO2) =< 0.05 mg/L Specifications Product code 253626 Model WE300 Performance Water obtaining system Reverse osmosis method - ion exchange method Water supply/discharge system Connected to tap water with a hose Quality of obtained water A3 ion exchange water Obtained amount and system of ion exchange water Approx. 16 L/h Continuous obtaining of water Specific resistance Approx.10Mohm cm (at water temperature: 25 deg.C) Microorganism 10 CFU/mL Fine particles Filtered with 0.22 um filter Silica 0.05 mg/L or less Configuration Preprocess cartridge With activated charcoal (Progard3) Ion exchange resin cartridge 2.4L ion resin cartridge (Q-GardA) Ion exchange water primary storage tank 10L tank Integrated pump RO pump, pure water supply pump Water leakage detection Water supply solenoid valve is forced to shut off when water leakage is detected Ion exchange water obtaining bed Resin water obtaining port Standards Raw water pressure range 0.1 to 0.3 MPa (L/min) Supply water rate 41 L/h Water temp. 2 to 35 deg.C Power source AC 100V 0.8A External dimensions*/weight 460 x 400 x 600 mm (W/D/H) Approx. 37 kg (Dispenser Approx. 5 kg) Display & settings Water quality display Conductivity is displayed in 5 steps LED Other displays Consumables replacement display (preprocess cartridge, ion exchange resin), alarm display (water leak alarm) Accessory Accessories Raw water supply hose, preprocess cartridge & ion exchange cartridge, pure water hose for obtaining water, water obtaining bed (delivery kit), operating manual, warranty card * External dimensions do not include protrusions. A water faucet and drain facility (or a sink) are necessary for installing this unit. Installation example Control panel Delivery kit (standard) Block diagram Consumables Optional parts & consumables Dimensional drawing (mm) Left: Preprocess cartridge Progard 3 Right: Ion exchange cartridge Q-GardA Item name Product code Preprocess cartridge Progard3 PR0G000003 Ion exchange resin cartridge Q-GardA CP2ALLRES RO membrane (2 in a set) CDRC602JH Contact us Index of Water Purifiers Return to home Copyright(c) 1998 YAMATO SCIENTIFIC CO.,LTD. All rights reserved For more information, call 0120-405-525(Free dial) E-mail:info@yamato- net.co.jp