| Option for Laboratory Stirrer
|
| |
 Adapter for depressurizing stirrer (for LT400/500)
|
| |
Sample picture |
[Specifications]
Material |
Fluoride resin & Nitrile rubber |
Stirrer bar |
φ8mm |
Vacuum level |
6.7Pa ( 5×10-2Torr ) |
Accessory |
Oil Seal (Nitrile rubber) 2pcs. |
Joint type |
T24/40 |
T29/42 |
|
Adapter for depressurizing stirrer(for LR400/500) |
| |
Sample picture |
[Specifications]
Material |
Fluoride resin & Nitrile rubber |
Stirrer bar |
φ10mm |
Vacuum level |
6.7Pa ( 5×10-2Torr ) |
Accessory |
Oil Seal (Nitrile rubber) 2pcs.
Stirring propeller for small mouth
|
Joint type |
T24/40 |
T29/42 |
|
Additional stirrer support (for LT400/500) |
| |
Sample picture |
[Specifications]
Additional stirring support |
Max. 3L beaker 2pcs. |
Stirrer bar |
φ8mm |
Stirrer bar interval |
135mm |
Belt |
O-ring (VitonP120) |
Accessory |
Hexagon wrench (2pcs.)
Belt (1pc.)
Chuck handle (1pc.)
Clamp (1pc.)
Puller (1pc.)
|
|
Additional stirrer support (for LR400/500) |
| |
Sample picture |
[Specifications]
Additional stirring support |
Max. 3L beaker 2pcs. |
Stirrer bar |
φ10mm |
Stirrer bar interval |
135mm |
Belt |
O-ring (VitonP120) |
Accessory |
Hexagon wrench (2pcs.)
Belt (1pc.)
Chuck handle (1pc.)
Clamp (1pc.)
Puller (1pc.) |
|
| Note: To use with below 60mm propeller. |
Propeller |
| |
 Quadruple propeller |
Propeller dimension |
75mm
60mm
40mm |
Screw type |
M5 |
|
 |
| Propeller for small mouth |
Propeller dimension |
45mm |
Screw type |
M5 |
|
 |
| Glass propeller |
Material |
Hard glass |
Propeller dimension |
60mm (Length 560mm) |
Stirrer bar |
for LT400/500φ8 |
for LR400/500φ10 |
|
 |
| Double propeller |
Propeller dimension |
100mm
28mm |
Screw type |
M5 |
|
 |
Turbine with round plate |
| |
| Turbine with round plate |
Propeller dimension |
100mm
60mm |
Screw type |
M5 |
|
 |
| Turbine with round plate for 2steps |
Propeller dimension |
60mm |
Screw bar |
for LT400/500 φ8 |
| for LR400/500 φ10 |
|
 |
Stirrer Bar |
Material |
SUS316 |
Size |
for LT400/500 |
500mm φ8mm |
for LR400/500 |
800mm φ10mm |
|
 |
Fixing support for water bath |
Max. thickness of container’s edge |
Max. 35mm |
Stirrer bar’s changeable angle |
Up to 60° |
|
 |
Stand |
| |
| Y shape stand (for LT400/500, LR400/500, L-35) |
Shaft dimension |
Length 725mm |
External dimension25mm |
Base size |
Width400mm |
Depth420mm |
Weight |
Approx. 7kg |
|
 |
| H shape stand (for LS-08) |
Shaft dimension |
Length550mm |
External dimension13.5mm |
Base size |
Width220mm |
Depth320mm |
Weight |
Approx. 3.9kg |
|
 |
Request reference material
Request for documents
Return to Home
Copyright(c) 1998 YAMATO SCIENTIFIC CO.,LTD. ALL rights reserved For more information,call 0120-405-525 (Free dial) E-mail:english-website@yamato-net.co.jp |