| Model |
DP63P |
 Performance |
| Operating System |
Decompression / Wall Surface Heater |
| Operating Temp. Range |
Room Temp. +5 to 200deg.C |
| Operating Pressure Range |
101 to 0.1 kPa (760 to 1 Torr) |
| Time to Reach to Max. Temp. |
Approx. 120min. |
| Temp. Adjustment Accuracy |
±1deg.C (at 200deg.C) |
| Components |
| Interior / Exterior |
Stainless Steel / Cold Rolled Steel Plate with Baked Melamine Resin Finish |
| Heating Type |
Direct Heating for Decompressed Chamber |
| Heater (Mica) |
3.15kW |
| Temp. Control Type |
PID Control by Microcomputer |
| Operating Function |
Fixed Operation: Continuous Operation under the set Temp. (Manual Operation Only) |
| Program Operation: Max. 16 Segments (Splittable, Repeating, Gradient Operation) |
| Additional Function |
Calendar Timer Function, Total Operation Hour Timer Function, Clock Display |
| Heater Circuit Control |
Triac Zero-cross Type |
| Sensor |
K-thermocouple (Double Sensor) |
| Safety Device |
| Safety Countermeasure |
Self Diagnosis Function (Temp. Sensor Abnormal, Heater Wire Broken, Triac Short Circuit, Automatic Overheat Prevention), Key Lock Function, Independent Overheating Prevention, Electric Leakage Breaker |
| Standard |
| Internal Dimensions |
W600 x D600 x H600mm |
| External Dimensions |
W820 x D819 x H1,650mm |
| Internal Capacity |
216L |
| Shelf Qty. / Pitch |
4pcs. Fixed / 140mm |
| Exhaust Port / Purge Port |
NW25 Flange / Rc 1/4 (for Purging) |
| Power |
Single Phase, 200V, 50/60Hz, 17A |
| Weight |
Approx. 300kg |
| Accessory |
Shelf (Stainless Steel Punching Metal) 2pcs. |
