Spray Dryer ADL310

Spray Dryer

ADL310

Water Evaporation

Max.1300 ml/h

Operating Temperature Range

40deg.C to 200deg.C

Liquid Sample Flux

up to 28 ml/min.

Spraying Nozzle

for Liquid and Air

The ADL310 is a compact spray dryer using a spray dry method which enables simple use experiments.

No danger of damaging foodstuffs, medical products and products that are sensitive to biochemical-heat.
No oxidation takes place and the water content of the formed powders is low, so that there is no contamination.
Even a solid body of ca.0.5g can be dried.

Control panel
ADL310 Control Panel
Inlet temperature, outlet temperature are displayed digitally. Condition setting dials and stage level control switch are located on the front panel for easy use.

ADL Control panel
In this Spray Dryer, the sample are dried and transformed into a uniform fine powder of amorphous form, so both its solubility and reactivity are extremely high in comparison to crystal.

ADL310

Easy operation and maintenance

Inlet temperature, outlet temperature and drying air volume are displayed digitally. Condition setting dials and stage level control switch are located on the front panel for easy use.

Drying chamber, cyclone, product vessel can be easily detached and cleaned.

Spraying nozzle

Nozzle size (µm)

Model		1A	1S	2A	2S	3
Nozzle No.		1650	2050	2050	2850	2850
(F)	A	406	508	508	711	711
(F)	B	1270	1270	1270	1270	1270
Nozzle No.		64	64	70	70	64
(A)	C	1626	1626	1778	1778	1626

Model 1A : Standard nozzle

Liquid nozzle (F)
ADL310 Liquid nozzle

Air nozzle (A)
ADL310 Air nozzle

System diagram

Specifications

	ADL310
Performance
Water evaporation rate	Max. approx. 1,300 ml/h
Temperature control range	40 to 200deg.C
Temperature control accuracy	±1deg.C
Dry air flow rate	Max. 0.7 m³/min.
Flow rate for Sample liquid feed pump	Max. 28 ml/min.
Structure
Temperature controller	PID Digital temp. controller
Heater	2 kW
Aspirator	Bypass-type blower
Sample liquid feed pump	Quantitative peristaltic pump
Spray pressure gauge	Bourdon tube pressure gauge, measurement range : 0 to 0.3MPa (0 to 3kg/cm²)
Spray nozzle	Two-liquid nozzle, 1A
Safety Device
	Self diagnosis functions (Temp. abnormal), Sample feed reversion system, Nozzle orifice cleaning(Pulse jet system, Manual)
Standard
Power source (50/60Hz)	AC 200/220V, single phase 16.5A/15A
External dimensions(W×D×Hmm)	580×420×1,075
Weight	Approx. 78kg
Accessories
Sample liquid tube	Silicone tube 2 pcs.
Optional Accessories
Drying air flow meter / Temp. recorder for inlet and outlet temp.

Request reference material

Request for documents

Return to Home