| Low
Temperature Incubator (IJ100W/300W) |
| Model IJ100W |
IJ100W/300W |
This is a personal-use type, chlorofluorocarbon-free
incubator which utilize a Peltiert device.
- The observation window on the IJ100W utilize energy-saving
pair glass and has been designed with concern for the environment.
Wasteful heat radiation is prevented through the combination
of pair glass and semi-tempered glass.
|
| Controller : Hitec IV FR type1
controller |
 |
|
| Specifications |
| Model |
IJ100W |
| Method |
Forced convection |
| Performance
(*1) |
Temperature control range |
0 to 60deg.C (room temp:
20deg.C, no load)* |
| Temperature adjustment accuracy |
±0.3deg.C(the
center of inner bath, at 37deg.C) |
| Temperature distribution
accuracy |
±1.0deg.C(the
center of inner bath, at 37deg.C) |
| Temperature rising time |
Approx. 40min. (20 to
60deg.C) |
| Temperature falling time |
Approx. 100min. (20 to
0deg.C) |
| Configuration |
Heating device |
Mica heater 120W |
| Cooling device |
2 peltiert devices, forced
radiating method:
It works continuous at the setting temperature below 35deg.C.
(It is turned off at the setting temperature 35deg.C and
over.) |
| Internal fan |
Axial fan (DC) |
| Control Section |
Controller |
Hitec IV FR type1 |
| Temperature control system |
PID control of heater
output by microprocessor |
| Temperature setting system |
Digital setting by up/down
keys |
| Operational mode |
Fixed temperature operation |
| Sensor |
Thermistor |
| Additional function |
Temperature preset function
(1 for desired temperature is able to set/load) |
Safety
Device |
Self-diagnostic function |
Sensor error, Heater error,
Triac error,
Main relay error, Auto overheating prevention |
| Preservation device |
Earth leakage breaker,
Independent overheating prevention device |
| Standard |
External dimensions (*2) |
350(W)×396(D)×535(H)
mm |
| Internal dimensions |
250(W)×250(D)×250(H)
mm
(Air jacket installed: 200×200×200 mm) |
| Internal capacity |
15.6L |
| Door |
Single door with magnet
packing |
| Observation window |
180 x 180mm (pair glass
and semi-tempered glass) |
| Weight |
Approx. 22kg |
| Power source (50/60Hz) |
100V AC3.5A / 220V AC1.6A |
| Accessories |
Shelf×2 (Load: 5kg
for each), Plate for drainage, Instruction manual |
| Optional accessories |
Extra shelf (with metal
fittings), Air jacket made of aluminum (with shelf), Inner
door made of acrylic resin, sliding-type tray |
|
*1: The value under the condition of the ambient
temperature of 20deg.C, and without load.
*2: The projection is not included. |
| Contact
us |
| Low
Temperature Incubator (IJ100W/300W) |
| Model IJ300W |
IJ100W/300W |
These are personal-use type, chlorofluorocarbon-free
incubator which utilize a Peltiert device.
- The observation window on the IJ300W utilize energy-saving
pair glass and has been designed with concern for the environment.
Wasteful heat radiation is prevented through the combination
of pair glass and semi-tempered glass.
- The IJ300W features a sliding-type tray (optional accessory)
to hold the shaker which is convenient for mounting the
micro-shaker and inserting/extracting samples.
|
| Controller : VS4 type controller |
 |
|
| Specifications |
| Model |
IJ300W |
| Method |
Forced convection |
Temperature control
range (*1) |
0 to 60deg.C (Ambient
temp.: 20deg.C, No load) |
| Temp. adjustment accuracy
(*1) |
±0.5deg.C (at
37deg.C) |
| Temp. distribution accuracy
(*1) |
±1.0deg.C (at
37deg.C) |
| Temp. rise time (*1) |
Approx. 60min. (20deg.C
to 60deg.C) |
| Temp. fall time (*1) |
Approx. 120min. (20 to
0deg.C) |
| Heater |
Pipe heater 300W |
| Cooling device |
4 peltiert devices, forced
radiating method |
It works continuous at the setting temperature
below 35deg.C.
(It is turned off at the setting temperature 35deg.C and over.) |
| Internal fan |
Axial fan (DC) |
| Controller |
VS4 type |
Temperature control
system |
PID control for heater
output by microprocessor |
| Setting system |
Digital setting by menu
key and up/down keys |
| Operation mode |
Fixed temperature, Quick
auto stop, Auto stop, Auto start, Program operation |
| Sensor |
Temperature sensor: Platinum
resistance (Pt 100Ω)
Overheating prevention sensor: K-thermocouple |
| Additional functions |
Lock function, Auto recovering
after power failure, Calibration offset |
Self-diagnostic
functions |
Failure of Sensor, heater,
SSR, automatic overheating prevention device
|
| Safety device |
Earth leakage breaker,
Overheating prevention device |
| Observation window |
180 x 280mm (pair glass
and semi-tempered glass) |
External dimensions
(W×D×H mm) (*2) |
450×496×665 |
Internal dimensions
(W×D×H mm) |
350×350×350
(Air jacket installed: 300×300×300 mm) |
| Capacity |
43L (Air jacket installed:
27L) |
| Door |
Single door with magnetic
packing |
| Service receptacle |
100V AC, max. 2A |
Power source
(50/60Hz) |
100V AC 8A / 220V AC 4A |
| Weight |
Approx. 39Kg |
| Accessories |
2 Shelves (withstand load:
10kg/one shelf), Plate for drainage, Instruction manual |
|
*1: The value under the condition of the ambient
temperature of 20deg.C, and without load.
*2: The projection is not included. |
 Optional
items |
| Remark |
Description |
Model No. |
Product Code |
| |
Shelf (for IJ100/100W) |
IJ Series |
221180 |
| |
Shelf (for IJ201) |
IJ Series |
221186 |
| |
Shelf (for IJ300/300W) |
IJ Series |
221187 |
| ● |
Air jacket (for IJ100/100W) |
IJ Series |
221179 |
| ● |
Air jacket (for IJ201) |
IJ Series |
221165 |
| ● |
Air jacket (for IJ300/300W) |
IJ Series |
221166 |
| ● |
Stackable rack (for IJ100/100W) |
IJ Series |
221169 |
| ● |
Stacking Support (for IJ201) |
IJ Series |
221167 |
| ● |
Stackable rack (for IJ300/300W) |
IJ Series |
221168 |
| ● |
Shaker setting stage with slide rail (for IJ300W) |
IJ Series |
221188 |
| ● |
External communication terminal (RS422A) (for IJ100/100W) |
IJ Series |
281200 |
| ● |
External communication terminal (RS485) (for IJ201/300/300W) |
IJ Series |
281191 |
| ● |
External communication adapter (for IJ100/100W) |
IJ Series |
281201 |
| ● |
External communication adapter (for IJ201/300/300W) |
IJ Series |
281202 |
| ● |
Temperature Output Terminal 4-20mA (for IJ100/100W) |
IJ Series |
221177 |
| ● |
External Alarm Terminal (for IJ100/100W) |
IJ Series |
221178 |
| ● |
External Alarm Terminal (for IJ201/300/300W) |
IJ Series |
281203 |
| ● |
Temperature Output Terminal 4-20mA (for IJ201/300/300W) |
IJ Series |
281204 |
| ● |
Time-up Output Terminal (for IJ201/300/300W) |
IJ Series |
281205 |
| ● |
Internal door (for IJ100/100W) |
IJ Series |
281206 |
| ● |
Internal door (for IJ201) |
IJ Series |
281207 |
| ● |
Internal door(for IJ300/300W) |
IJ Series |
281208 |
| ● |
Internal door for air jacket (for IJ100/100W) |
IJ Series |
281209 |
| ● |
Internal door for air jacket (for IJ201) |
IJ Series |
281210 |
| ● |
Internal door for air jacket (for IJ300/300W) |
IJ Series |
281211 |
|
| Note: The item marked " ● " in the column of "Remark" shall be ordered together with the main unit. |
|
Contact us
Request reference material
Request for documents
Return to Home
Copyright(c) 1998 YAMATO SCIENTIFIC CO.,LTD. ALL rights
reserved For more information,call 0120-405-525 (Free dial) E-mail:english-website@yamato-net.co.jp |