Incubator Model IJ100/201/300

Low Temperature Incubator

Model IJ100/201/300

IJ100/201/300

IJ100

IJ201/300

This is a personal-use type, chlorofluorocarbon-free incubator which utilize a Peltiert device. Incorporating a temperature presetting function.

Controller : Hitec IV_FR type1 controller

These are personal-use type, chlorofluorocarbon-free incubator which utilize a Peltiert device.Incorporating a temperature presetting function, the IJ201 is a personal-use, space saving low temperature incubator used for multiple purposes, such as low-temperature testing and sample preservation.

Controller : VS4 type controller

Specifications

Model		IJ100
Method		Forced convection
Performance (*1)	Temperature control range	0 to 60deg.C (room temp: 20deg.C, no load)*
	Temperature adjustment accuracy	±0.3deg.C(the center of inner bath, at 37deg.C)
	Temperature distribution accuracy	±1.0deg.C(the center of inner bath, at 37deg.C)
	Temperature rising time	Approx. 40min. (20 to 60deg.C)
	Temperature falling time	Approx. 100min. (20 to 0deg.C)
Configuration	Heating device	Mica heater 120W
	Cooling device	2 peltiert devices, forced radiating method: It works continuous at the setting temperature below 35deg.C. (It is turned off at the setting temperature 35deg.C and over.)
	Internal fan	Axial fan (DC)
Control Section	Controller	Hitec IV FR type1
	Temperature control system	PID control of heater output by microprocessor
	Temperature setting system	Digital setting by UP/DOWN keys
	Operational mode	Fixed temperature operation
	Sensor	Thermistor
	Additional function	Temperature preset function (1 for desired temperature is able to set/load)
Safety Device	Self-diagnostic function	Sensor error, Heater error, Triac error, Main relay error, Auto overheating prevention
Safety Device	Preservation device	Earth leakage breaker, Independent overheating prevention device
Standard	External dimensions (*2)	350(W)×396(D)×535(H) mm
	Internal dimensions	250(W)×250(D)×250(H) mm (Air jacket installed: 200×200×200 mm)
	Internal capacity	15.6L
	Door	Single door with magnet packing
	Weight	Approx. 20kg
	Power source (50/60Hz)	100V AC3.5A / 220V AC1.6A
Accessories		Shelf×2 (Load: 5kg for each), Plate for drainage, Instruction manual
Optional accessories		Extra shelf (with metal fittings), Air jacket made of aluminum (with shelf)

*1: The value under the condition of the ambient temperature of 20deg.C , and without load.
*2: The projection is not included.

Option :Air jacket made of aluminum (with shelf)

Specifications

Model	IJ201	IJ300
Method	Forced convection
Temperature control range (*1)	0 to 60deg.C (Ambient temp.: 20deg.C, No load)
Temp. adjustment accuracy (*1)	±0.5deg.C ( at 37deg.C)
Temp. distribution accuracy (*1)	±1.0deg.C ( at 37deg.C)
Temp. rise time (*1)	Approx. 50min. (20deg.C to 60deg.C)	Approx. 60min. (20deg.C to 60deg.C)
Temp. fall time (*1)	Approx. 120min. (20 to 0deg.C)
Heater	Pipe heater 150w	Pipe heater 300w
Cooling device	2 peltiert devices, forced radiating method	4 peltiert devices, forced radiating method
Cooling device	It works continuous at the setting temperature below 35deg.C. (It is turned off at the setting temperature 35deg.Cand over.)
Internal fan	Axial fan (DC)
Controller	VS4 type
Temperature control system	PID control for heater output by microprocessor
Setting system	Digital setting by menu key and up/down keys
Operation mode	Fixed temperature, Quick auto stop, Auto stop, Auto start, Program operation
Sensor	Temperature sensor: Platinum resistance (Pt 100Ω) Overheating prevention sensor: K-thermocouple
Additional functions	Lock function, Auto recovering after power failure, Calibration offset
Self-diagnostic functions	Failure of Sensor, heater, SSR, automatic overheating prevention device
Safety device	Earth leakage breaker, Overheating prevention device
External dimensions (W×D×H mm) (*2)	580×417×426	450×496×665
Internal dimensions (W×D×H mm)	300×300×300 (Air jacket installed: 250×250×250 mm)	350×350×350 (Air jacket installed: 300×300×300 mm)
Capacity	27L (Air jacket installed: 15.6L)	43L (Air jacket installed: 27L)
Door	Single door with magnetic packing	Single door with magnetic packing
Power source (50/60Hz)	100V AC 4.5A / 220V AC 2.1A	100V AC 8A / 220V AC 4A
Weight	Approx. 25Kg	Approx. 37Kg
Accessories	2 Shelves (withstand load: 10kg/one shelf), Plate for drainage, Instruction manual

*1: The value under the condition of the ambient temperature of 20deg.C, and without load.
*2: The projection is not included.

Optional items

Remark	Description	Model No.	Product Code
	Shelf (for IJ100/100W)	IJ Series	221180
	Shelf (for IJ201)	IJ Series	221186
	Shelf (for IJ300/300W)	IJ Series	221187
●	Air jacket (for IJ100/100W)	IJ Series	221179
●	Air jacket (for IJ201)	IJ Series	221165
●	Air jacket (for IJ300/300W)	IJ Series	221166
●	Stackable rack (for IJ100/100W)	IJ Series	221169
●	Stacking Support (for IJ201)	IJ Series	221167
●	Stackable rack (for IJ300/300W)	IJ Series	221168
●	Shaker setting stage with slide rail (for IJ300W)	IJ Series	221188
●	External communication terminal (RS422A) (for IJ100/100W)	IJ Series	281200
●	External communication terminal (RS485) (for IJ201/300/300W)	IJ Series	281191
●	External communication adapter (for IJ100/100W)	IJ Series	281201
●	External communication adapter (for IJ201/300/300W)	IJ Series	281202
●	Temperature Output Terminal 4-20mA (for IJ100/100W)	IJ Series	221177
●	External Alarm Terminal (for IJ100/100W)	IJ Series	221178
●	External Alarm Terminal (for IJ201/300/300W)	IJ Series	281203
●	Temperature Output Terminal 4-20mA (for IJ201/300/300W)	IJ Series	281204
●	Time-up Output Terminal (for IJ201/300/300W)	IJ Series	281205
●	Internal door (for IJ100/100W)	IJ Series	281206
●	Internal door (for IJ201)	IJ Series	281207
●	Internal door(for IJ300/300W)	IJ Series	281208
●	Internal door for air jacket (for IJ100/100W)	IJ Series	281209
●	Internal door for air jacket (for IJ201)	IJ Series	281210
●	Internal door for air jacket (for IJ300/300W)	IJ Series	281211

Note: The item marked " ● " in the column of "Remark" shall be ordered together with the main unit.