Solvent Recovery Unit, GAS410

Solvent Recovery Unit

GAS410

Circulation wind amount

0.12 to 0.65 m3/min

Recovery capacity

1,300 mL/h or more

Highly safe N2 gas sealed circulation system is realized by connecting to a spray dryer unit.

This product is an organic solvent recovery system to be used to prevent discharging to outside, by using in combination with a spray dryer ADL311S-A or GB210-A when either of them uses an organic solvent.

By combination of a N2 gas sealed circulation system and a solvent recovery system with a freezer and capacitor, flammable or toxic solvent can be processed.
Drying of easily oxidized materials is possible.
This unit supports low temperature drying and available for drying of materials that easily deform with heat.
Spray drying and recovery of products and solvents are performed with a meticulously devised safety measures.

Example of installation

Specifications

Model		GAS410
Product code		212774
Solvent recovery system		Capacitor + freezer
Performance	Circulating gas	N2 gas (sealed circulation when connected to ADL311S-A or GB210-A)
Performance	Circulating wind amount	0.12 to 0.65m3/min
Configuration	Compressor (for spraying)	Linear compressor integrated
	Circulation blower	Roots blower
	Solvent recovery container	2L flask
	Freezer	Air-cooled condensation full-sealed type: 400W R404A
	Solvent recovery mechanism	Capacitor cooling mechanism
	Filter	Cartridge filter
	Instruments	Cooling trap temperature display monitor
		Filter differential pressure meter (monitor for clogging of filter)
		O2 density display monitor
		Blower wind amount adjusting volume
	O2 sensor	Solid electrolyte (Zirconium) limit current type
	Pump	For circulation for O2 sensor
Safety unit		O2 density meter, flammable gas alarm, electric leakage breaker, N2 gas forced introduction (when removing nozzles)
Standards	External size	W700 x D950 x H1,500 mm
	Weight	Approx. 130 kg
	Power supply (50/60 Hz) rated current	AC200 to 240V 5A (15A)
	Required N2 amount	15 L/h at 0.1 MPa
Accessories		Set of connection parts, anti-seismic clamps, interface cable, sample gas for gas alarm inspection, 2L flask

Control panel

Major control functions and detection function

(1) Closed system (N2 gas sealed circulation type)
(2) O2 density control function
(3) Flammable gas detection function
(4) Inlet temperature overheat detection function
(5) Outlet temperature overheat detection function
(6) Other self diagnostics functions

●Detection of temperature sensor disconnection
●Overheat prevention
●Detection of absence of spray nozzle *When an abnormality occurs, the alarm will sound and power supply to the heater and sending of liquid will be stopped.

Applicable fields

●Non-oxide ceramics related fields
●Polymer material related fields
●Super conductivity material related fields
●Medicinal product related fields
●Food related fields

System diagram

No.	Part name	No.	Part name
(1)	Capacitor	A	O ring
(2)	Sensor	B	Packing
(3)	Ball valve	C	Hose
(4)	Clamp	D	Spray nozzle
(5)	Recovery flask	E	Tube
(6)	Filter element	F	Aluminum honeycomb
(7)	Filter case	G	Cap
(8)	Differential pressure meter	H	Pressure meter
(9)	Flow meter (for introduction of N2)	I	Needle valve
(10)	Compressor	J	3-way valve
(11)	Solenoid valve (for N2 control)	K	Solenoid valve
(12)	Flow meter (for measuring O2 density)	L	Packing
(13)	Filter
(14)	Pump
(15)	O2 sensor
(16)	Solenoid valve (for exhaust)
(17)	Blower
(18)	Solenoid valve (for introduction of N2)
(19)	Solenoid valve (for air supply)

Connection
Rear of GAS410	ADL311S-A + GAS410 + stand with caster wheels

Optional parts

Product name	Product code
Filter element 0.1µ	212785
Viton packing for cyclone inlet/outlet (1 set of 2 types)	212781
Teflon packing for cyclone inlet/outlet (1 set of 2 types)	212782
* Dry air flow meter (differential pressure type)	212786

Note : The item marked " * " in the column of "Remark" shall be ordered together with the main unit.

Request reference material

Request for documents

Return to Home