| |
BM100 |
BM200 |
BM400 |
 Performance |
| Temp. range during operation*1 |
Room temp. +5deg.C to 95 deg.C |
Room temp. +5deg.C to 95 deg.C |
| Temp. setting range |
0deg.C to 100deg.C |
0deg.C to 100deg.C |
| Accuracy of temp. adjustment*2 |
±2deg.C (at 60deg.C) |
±1deg.C (at 60deg.C) |
| Components |
| Control system |
ON/OF control |
PlD control by microprocessor |
| Set-up system |
Analog set-up |
Digital setting by   key |
| Temp display method |
Glass thermometer |
Digital display shows the measured/set temp. |
| Operation function |
Operation at fixed point |
Operation at fixed point |
| Extra function |
No extra function |
Temp. presetting function (preset/select one temp.) |
| Sensor |
- |
Pt 100Ω |
| Thermoregulator |
Liquid-operated thermoregulator |
- |
| Heater |
Copper pipe heater, 500W |
SUS316 pipe heater, 1000W |
SUS316 pipe heater, 1000W |
| Power switch |
Paddle switch |
Also functions as circuit protector |
| Power lamp |
Lit when power is on |
- |
| Others |
- |
Drain (with plug)
Service outlet for Rotary evaporator |
| Safe Device |
| Safety countermeasures |
Protection from over current (fuse), Protection cover for bath,
Thermal fuse |
Self-diagnostic functions (Automatic overheat
prevention, Sensor trouble)
Circuit protector, Protection cover for bath,
Thermal fuse |
| Standard |
Bath Capacity/Material
Internal Dimensions*3
|
3.7 L
ø 200×Depth 120mm
|
7.0L
ø250×Depth 150mm
|
| Effective |
ø200×Depth 86mm |
ø250×Depth 108mm |
ø250×Depth 97mm |
| External dimensions(W×D×Hmm)*3 |
240×300×150 |
310×360×230 |
| Power source 50/60Hz |
AC100V/220V, Single phase,
5A/2.3A |
AC100V/220V, Single phase,
10A/4.6A |
AC100V/220V, Single phase,
10A/4.6A |
| Weight |
Approx. 3.5kg |
Approx. 6.0kg |
Approx. 7.0kg |
| Accessories |
| Bar thermometer (10 to 110deg.C) with immersion line |
*1. In case of unloaded operation of bath only. The maximum temperature varies on circumstances and operational conditions.
*2. The performance shown here is the value under the condition of the ambient temperature of 23deg.C±5deg.C, humidity of 65%RH±20%.
*3. The projection is not included for Internal dimensions and External dimensions.
