The total cell quantity in cell aggregates can be counted by the calculation that an average area of single cell divides the total surface of all cell aggregates until now. This circle separation method installed in D/A Cell Counter is able to count each cell in the overlap area of cells, and then you can inspect whether there is a correlation between two results from this counter and the visual sight observation.
(* The circle separation method applies a cell recognition algorithms that is based on the outline model, and is enabled to identify each cell in cell aggregates that normal2-bit image processing method was unable to identify.)

Although it has taken much time to analyze the image when you extract the cells and determine whether cells are dead or viable until now, at present it can be easily set by adjusting the level bar as you are observing the image. Moreover this setting condition can be saved with the cell type so that you do not need to repeat the same measurement every time .

Usually only operator has confirmed the measurement results, and submitted the results in the form of hand-written memo. D/A Cell Counter can save the results as cell images. You can easily create a report because both results and images are transferred to Excel sheet in one click.

Mounting the CCD camera in your current manner using phase contrast trinocular microscope, you can take measurement data by using the latest image processing technology.

Main body

721410

DA Cell Counter for Note PC

1 set

¥2,300,000

Main body

721411

DA Cell Counter for Desktop PC

1 set

¥2,100,000

Hemacytometer

721481

Hemacytometer (No glid, 0.1mm depth)

1 pc

¥20,000